Scale Accessories:
Power Adapters, Covers, Cases, Cables & More

The 30699120 USB device kit adds USB connectivity to Ohaus Defender 3000 i-D33P and i-D33XW models.

A&D HD-05 current loop printer interface for use with the A&D HD series industrial counting scales.

AND Scales RS422/485 for use with the A&D SW Series super washdown scales.

Factory installed weigh below kit for the Adam CKT series.

The Health o meter PortRod Wall Mounting Height Rod. This height rod has a measuring range of 24" to 83" (60 cm to 211 cm)

RS-232 interface and current loop output for use with the A&D HD Series industrial counting scales

AND Scales FS-03i RS232 Port and Relay for A&D FS-i Series Checkweighing Scales.

A&D AX31 100 pack of reusable sample pans for use with A&D moisture balances.

The 30041419 is a power adapter only and requires a plug that is sold separately.

A&D AD-1700-20G 20 gram calibration weight. This weight has a tolerance of 0.074 mg and can be used as a test weight for scales and balances with precision as high as 0.0001 gram.

Ohaus 80850087 200 pack glass fiber pads for Ohaus moisture balances MB23, MB25, MB35 and MB45.

A&D AX-T-314A-S external key plug for use with the A&D SW:128 foot switch.

AND FXI-11 large, (7.9" high) draft shield for the A&D FX-i and FZ-i balances.

Ohaus 80252477 sample pan with cage lid for use with the Ohaus MB27, MB35, MB90 and MB120 moisture balances.

Ohaus 80000053 Specimen Box With Lid.

Ohaus 83021083 display extension cable for the Ohaus Explorer series.

Ohaus 30467963 travel case for use with the Ohaus Navigator balances.

Add weigh below capability to your Ohaus Valor 7000 series. Great for density determination and more.

The Enterprise APSRD Remote Display comes with a 6ft cable, Velcro, and a mounting bracket. It can be mounted to a wall or the APSPOST display tower.

Use this four pack of replacement electrode units with the ionizer of the A&D Ion BM series balances.

The A&D GXA-12 animal weighing cup attaches to the Apollo GF-A and GX-A balances to securely capture weights of small animals.

A&D HVW-03CWP RS-232C interface for the A&D HV-CWP and HW-CWP series washdown bench scales.

Add USB connectivity to the Ohaus Scout SPX, Scout STX and Scout SJX balances.

Adam Equipment 303200002 In-Use Wet Covers for use with Adam WBW, WBW-M and WBZ washdown scales.

Adam Equipment 700200058 10-Pack In-Use Wet Covers for use with Adam CBD, CBC and CBK Scales.

10-Pack of sturdy n-use covers for the Adam Equipment Raven Series.

Send weighing data from the GX and GF series to a computer with USB.

Three pack of stainless steel weighing pans for use with the Health o meter 3400KL and 3401KL.

AND Scales RS-422/485 comparator relay for use with the A&D FS-i series industrial scales.

AND SCE-02 USB interface for use with the A&D SC and SE Series Washdown Bench Scales.

Use this memory kit with your Ohaus Defender 7000 or Ranger 7000 to record weight readings and other data from your scale.

AND Scales FS-01i Wall Mounting Bracket for the FS-i Series industrial checkweighing scales.

This Traveler's storage and transport case is water, dust, and impact resistant and suitable for many Intelligent Weighing Technology scales and balances.

Intelligent-Weigh hanging pan platter and suspended support for use with the AHS hanging scales.

The Ohaus 77256-01 Hard Shell Carry Case for Ohaus Scout Pro balances. Store and Transport you scale safely with this durable case.

AND Scales FS-C 21.5" Digital Display Extension Column. For use with the A&D FS-30Ki checkweighing scale.

A&D HVW-04C comparator relay output/buzzer/contact input for the A&D HV-C, HW-C, HV-CP, and HW-CP series bench scales.

SECA 220 Telescopic Measuring Rod for SECA Column Scales has a measuring range of 23 5/8" to 78 5/8". The headpiece is secured on both sides for accuracy and folds down for a greater degree of safety.

SECA 2201714008 Telescopic Measuring Rod for SECA Column Scales has a measuring range of 60cm to 200cm. The headpiece is secured on both sides for accuracy and folds down for a greater degree of safety.

Travel case for use with the Ohaus Scout SPX, STX and SJX balances.

Stainless steel weighing scoop and counter weight for use with triple beam scales without a tare feature.

AND Scales Comparator Output with buzzer for use with the A&D Everest series precision scales.

Ohaus AD7-MD Auxiliary display kit for the Ohaus Scout SPX, STX and SJX/E balances. Great for displaying your readings up on a wall or another convenient location.

The Ohaus 80251216 Hard Shell Carry Case for Ohaus Valor 3000 Xtreme Series Compact Bench Scales. Perfect for storing and transporting your Ohaus balances.

Ohaus 30372146 set of four wheels for Ohaus Defender i-D33 and D52 models up to 600 pound capacity.

Use this plastic draft shield with the FX-iWP and FZ-iWP balances. 7.9 inches tall.

A&D GXA-26 external touchless sensor for use with the A&D Apollo balances. This sensor can be set to activate either the REZERO or PRINT command on your balance for hand-free operation from a distance.

Adam Equipment 307140001 250-Pack Sample Pans for use with the Adam PMB Moisture Balances.